Welcome to KCCE inflatables
8m Inflatable Display and advertising Flag
8m Inflatable Display and advertising Flag
8m Inflatable Display and advertising Flag
8m Inflatable Display and advertising Flag
8m Inflatable Display and advertising Flag
8m Inflatable Display and advertising Flag
8m Inflatable Display and advertising Flag

8m Inflatable Display and advertising Flag

Model NO.:
IFP-DS-8
Price:
USD 249.00-268.00 / set
Delivery:
FOB
Minimum order quantity:
1 set
Supply Ability:
1000.0 set / Month
Country of Origin:
Shenzhen
  • Material:TPU
  • Accessories:Pump
  • Printing:Heat Transfer Printing
  • Color:Customized Color
  • Application:Sporting Event
  • Model:Inflatable Festival Outdoor
  • Type:flag
  • Place of Origin:CN
  • Brand Name:KCCE
  • Model Number:IFP-DS-8

inflatable display flag introduction:

size colorweight inflation timeproduction timepacking shipping time   
6mstandard or customized5kg3 mins7 days25X23X20cm3~5 days   
8m7kg5 mins7 days30X30X20cm   
10m9kg7 mins7 days 35X35X20cm   

 

There are three heights, 6 meters, 8 meters, 10 meters

flag (1).jpg


Two kinds of flag surface, single-sided printing flag surface, double-sided printing flag surface.
Flagpole: Stock color flagpole, such as black, white, red, blue and gray

flag5.jpg


Printing flagpoles, monochrome printing specified by the customer, too complex colors cannot accept printing
The base, generally a water bag, is used to add weight to the flag. If the customer has special requirements or has its own better weighting method, it is not necessary to choose the base.
Accessories: Usually ropes and ground nails, but because there is a water bag, the ground nail can only be fixed on the water bag.

_20200907102705.jpg
Electric pump: The voltage of each country is different. The salesman will prompt which voltage electric pump to choose from different countries. The electric pump can be used to inflate or deflate, which can save installation and packing time.


The printing method is generally thermal transfer. If it is single-sided printing, it is very simple. One side is printed and the other side is not printed. If it is double-sided

flag4.jpg

printing, an extra layer of shading cloth will be added in the middle to prevent the printing on both sides from affecting the appearance.

flag (3).jpg
Inflation time for display banner: Generally 3~5 minutes, find the position of the air nozzle and connect the electric pump.

blower-yellow.jpgblower.png
TPU patch: If the inflatable flagpole is leaking, you can use the TPU patch to repair it, tear off the paper, and paste it on.